Belt Furnance
1. FURNACE FOR CONTINUOUS ANNEALING OF WIRES AND STRIPS:
The LINX electric furnaces are designed for continuous annealing and deoxidation. With one, two or four fully independent working lines, each one with uncoiling unit, heating and cooling camber, tensioning unit, possibility to work materials of different profiles and alloys, pre- arrangement for built-in ammonia gas dissociator or for hydrogen and nitrogen gas.
ADVANTAGES
- Maximum quality of the product thanks to possibility of a repastable and effective heat treatment.
- Consistent result
- Oxidation-free treatments
- Independent working temperature control for each working line
- Possibility to treat simultaneously in multiple lines profiles of different sections and alloys.
- Total absence of traction-induced tension in the product during the whole heat treatment.
- Lower power and gas consumption
- Reduced heat wasting in the working environment.
- Active and passive safety.
Specifications
MODEL | LINX L 101 | LINX L 102 | LINX L 102 N | LINX L 104 | LINX L 104N |
Chamber diameter | 28mm | 28mm | 28mm | 28mm | 28mm |
Heating chamber length | 1000m | 1700mm | 1700mm | 1700mm | 1700mm |
Heating zones | 1 | 1+1 | 1+1 | 1+3 | 1+3 |
Working lines | 1 | 2 | 2 | 4 | 4 |
Wire production | yes | yes | yes | yes | yes |
Strips production | Max 11mm | Max 2 mm | Max 11 mm | Max 2mm | Max 11mm |
Maximum speed | 50m/min | 70m/min | 70m/min | 70m/min | 70m/min |
Maximum temp | 950oC | 950oC | 950oC | 950oC | 950oC |
On request |
| 1100oC |
| 1100oC |
|
Furnace heating power | 3kw | 7kw 10kw | 7kw | 15kw 18kw | 15kw |
On request | 1.8kw | 2.5kw | 2.5kw | 4kw | 4kw |
Voltage | 230v 50/60 Hz 1ph | 230/400v 50/60 Hz 3ph | 230/400v 50/60 Hz 3ph | 230/400v 50/60 Hz 3ph | 230/400v 50/60 Hz 3ph |
Dimensions | 320x63x140h cm | 484x70x155h cm | 510x70x155h cm | 504x70x179h cm | 560x70x195h cm |
Weight | 430kg | 110kg | 1230kg | 1550kg | 1690kg |
2. CONVEYOR BELT FURNACE FOR SINTERING:
Belt furnaces with multiple independent heating and cooling zones in line complete with special cavity cooling chamber, for the continuous sintering under deoxidizing atmosphere of sintered diamond beads for the productions of diamonds wires to cut marble and granite and for sintered diamond sectors, etc.
ADVANTAGES
- Electric control panel incorporated in the furnace.
- Excellent energy performance with 50% electricity consumption.
- Constant temperature all along the muffle.
- Muffle made of refractory steel alloy for high working temperature
- Various possibilities in the use of the gas
- Up to 40% of deoxidizing gas consumption
- Working environmental friendly chimneys to burn gas
- Repeatable working cycles
- High speed of sintering and brazing
Specifications
MODELS | BF 100 | BF 120 | BF 180 | BF 240 |
MAX TEMP. | 1150 °C | 1150 °C | 1100 °C | 1100 °C |
MUFFLE SECTION | 100 x 50 h mm | 130 x 60 h mm | 180 x 90 h mm | 240 x 90 h mm |
USEFUL BELT WIDTH | 90 mm | 110 mm | 160 mm | 220 mm |
SPEED OF THE BELT | max 900 mm/min | max 900 mm/min | max 900 mm/min | max 900 mm/min3 |
HEATING ZONES | 3 | 3 | 3/4 | 3/4 |
HEATING CHAMBER LENGTH | 2100 mm | 2100 mm | 3000 mm | 3000 mm |
DIMENSIONS | 660x115x180 h cm | 660x115x180 h cm | 900x144x214 h cm | 900x144x214 h cm |
ELECTRIC SUPPLY | 230/400 V 50/60 Hz (3 ph) | 230/400 V 50/60 Hz (3 ph) | 230/400 V 50/60 Hz (3 ph) | 230/400 V 50/60 Hz (3 ph) |
